DESIGN TO CONNECT - your inspiration source for joining methods

Cracked System | Magnets

2012-01-25T13:01:00.000-08:00

In order to increase the possible combinations of the modules, a special emphasis was placed on easy assembly solution. Thus the metal joints are fixed to the shelf with magnetic pieces embedded in the wood, so that in the assembly of the furniture is not necessary to use any tools. (+ source)

Suple Series | Fit

2012-01-25T12:50:00.000-08:00

SUPLE is a fixation system that allows joining elements with “several legs" into a single connector piece. Suple’s parametric algorithm makes possible a wide variety connetor for objects such as tables, chairs, benches, stools and others, because it is possible to adjust any parameter and crossing this DNA with a design function. (+ source)

Needle twister | Magnet

2012-01-25T12:18:00.000-08:00

The needle twister is a useful and handy utensil for storing, safely transporting and sorting sewing and darning needles. The easy-to-operate turning mechanism fans the needles out so that all of the different types and sizes of needles can be identified at a glance. An internal magnet keeps the needles in position and helps in collecting any loose ones from the table. (+ movie) (+ source)

Puzzles for living | Interlocking shape + pins

2012-01-25T12:13:00.000-08:00

Puzzles for living by Konstantin Achkov. Plywood furniture joined together using interlocking shapes and pins. (+ source)

Plywood furniture | Interlocking shape

2012-01-25T01:28:00.000-08:00

Plywood furniture joined together using integrated interlocks. No glues screws or fixings are needed.(+ read more)

“Sketch Chair” is a exploration in using computation and rapid manufacturing techniques to allow users to design and build their own products or in this case their own chairs. (+ source)

Chairfix by by Ben Wilson. 3 chairs are routed out of one sheet of 8x4 15mm Birch faced ply-wood or MDF. 126 flat pack units will fit on a standard euro pallet. Easily assembled in minutes by the end user. No glues screws or fixings are needed. A selection of artists customised the chair.
(+ source)

Pano chair, counters plated filmed, water-jet cutting, assembly by tenon and mortise.The shape of the Pano chair is almost entirely conditioned by a double system of constraints: the optimization of the matter, the absence of screws and bolts. Its assemblage, without adhesive, is based on the principles of lever, assembly in force and warped surface. (+ source)

Star table project by Ben Huggins is a simple mathematical endeavor. Craft a line here, stack an angle there and you’ve constructed a very chic table! Three tables can be cut from one 1200mm x 2400mm sheet of 15mm ply by CNC. No screws or ﬁxings. (+ source)

3D geometric puzzles | Interlocking shape

2012-01-20T12:21:00.000-08:00

3D puzzles are assembled in a very ingenious and appealing way. These could be used as an inspiration source for designers to create products.(+ read more)

Puzzleworld.org contains many different three-dimensional puzzles. A source of inspiration. (+ source)

Frabjous is a 3D structure and geometric assembly puzzle created by George Hart. Composed of 30 identical acrylic pieces. (+ movie) (+ source)

Tension furniture | Ropes

2012-01-19T08:34:00.000-08:00

An overview of different tables and other furniture constructed under tension using ropes.(+ read more)

The contemporary furniture design by Aïssa Logerot called “Extensions” addresses the concept of multipurpose use and the desire for durability and quality. Products in this Extensions project are made in a non-fixed state, made to become whatever they need to be as the situation in which they are in changes!(+ source)

This simple table concept gets rid of screws and other connective elements. This table is easily installed and de-assembled for storage by any user. Just put the legs through the table secure them with the 2 pieces of string and you are done. (+ source)

German designer and manufacturer Nils Holger Moormann presented a table using rather simple and tough materials such as untreated wood, ropes and iron. (+ source)

Red rope table by Itay Laniado. Tensioned with a rope, wood legs and tabletop. (+ source)

Click floor tiles | Snap

2012-01-18T02:42:00.000-08:00

Integrated click connections are used to join laminate and vinyl floor tiles.(+ read more)

Super Click. Luxury vinyl tile floors with a clever click system. (+ movie)(+ source)

Simply click your floor together with the Uniclic system. This is much faster than systems that can only be installed using a hammer and tapping block. You can not dammage the floor pannels. In contrast to most other systems the panels can also joined together horizontally. (+ movie) (+ source)

Hose clip shelving | Thread clamp

2012-01-17T05:55:00.001-08:00

Hose clamp shelving by Max Frommeld. Versatile, modular, flatpack shelving unit which introduces standard hose clips to the furniture world. (+ source)

Clamp-legs tables | Screw clamp

2012-01-15T07:00:00.000-08:00

Table legs with integrated screw clamps could be attached to different flat surfaces to create a table.Several embodiments of the same concept exist. (+ read more)

Philippe Nigro has developed a table and chair concept that functions in a dynamic way. The foundation of the table is called a “Universal Base” to which any square or rectangular top can be clamped. No tools needed. The designer cleverly left the functional components exposed. (+ source)

Clamp-a-Leg consists of a wooden furniture leg threaded into a simple metal clamp, allowing people to quickly transform any flat surface into a functional work surface. Clamp-a-Leg uses less material than a trestle and is easy to ship, store, and assemble.(+ source)

Make a table by Yael Zwickel. The legs can be adjusted to fit on many objects to create a table.(+ source)

Clamp coffee table by nonlineair studio. The product is constructed out of pickled oak and steel clamps with a 1/2″ tempered glass top.(+ source)

Ryan Sorrel has designed a set of table legs that can be clamped onto the corners of a board to form a table. The legs can accommodate boards of varying thickness and are designed for creating temporary or seasonal furniture.

(+ source)

Over mold wooden furniture | Over molding

2012-01-15T01:31:00.000-08:00

Joining wood using an overmold process. Several designers create inspirational furniture using this technique.(+ read more)

Dar by Christof Schmidt. The solid wooden elements of the chair are broken to measure and placed into a silicone-mould. Due to its expansion the poured in polyurethane foam infiltrates into every single wooden fibre at the breaking point and connects the pieces soundly. The foam hardens within minutes. (+ Source)

Elastic wood by Gilli Kuchik. Elastic wood focuses on wood joinery and seeks to explore what happens when they become flexible. Its production is influenced by the process of over molding, where two materials are used to complete an enhance each other's characteristics.(+ source)

This work comes from the IDEA course experimantal connections. Connecting organic wood with plastic (polymer) materials, Manipulating the shape and flexibility of the connection while in production by using flex molds. (+ source)

Table seen on the Dutch Design Week 2011. Designer unknown?

Smart tapes | Adhesive tape

2012-01-14T03:40:00.000-08:00

Several ideas and realisations to improve the usability of adhesive tapes. (+ read more )

"Smart Paper Tape" was designed to put an end to the frustration that accompanies trying to find the end of a roll of tape. When this diagonally striped tape is cut, the end of the tape is clearly evident as the stripes do no align. (+ source)

Pritt "No More Scissors" Packaging Tape. The original with serrated edges. Easy to tear by hand. (+ source)

When sealing a box, have you ever needed to use more packing tape than should really be required because you positioned the tape inaccurately? With its visible centre line, Center Tape allows for exact and efficient taping. (+ source)

The V-Tape concept design is pretty basic. It's just a plain roll of tape with a little v-shaped cut along one edge. Thanks to that cut, you'll tear off the tape in the same spot each time and know where to find the end. (+ source)

Strap products and furniture | Strap

2012-01-14T02:19:00.000-08:00

Several products are designed with standard straps. The straps hold the product together. (+ read more)

'The build-it-yourself tree house' by Rogier Martens & Sam van Veluw. The tree house can be build without using any glue or screws. It is easy to build using straps and lashings. The whole package consists of 7 panels, 4 straps and lashings and a manual. (+ source)

'The ratchet shelves' by Harry Hasson. The shelves use no screws, no nails and no glue. Just the strength of the ratchet is what holds them together. (+ source)

'The collapsible ladder' by Itay Laniado. The ladder is held together by a ratcheting strap clamp, which also forms two of the rungs. The ladder packs down compactly, with the legs tucking into the routed grooves that held them up. (+ source)

Strap on furniture by FOBricated. 'Table, chair, and bench set held together with tension from ratchet straps – no glue, nails, or screws.(+ source)

Wood X Plastic | Hot deforming

2012-01-11T06:49:00.000-08:00

Wood X Plastic by Hunn Wai. First a small hole is made in the acrylic sheet and is heated for an exact duration. The wooden pole is then pushed through sheet by sheet. When the plastic cools down, it contracts around the pole to create a vice-like grip. This is repeated, resulting in a strong and stable structure. (+ movie) (+ source)

Floating lamp | Electro magnets

2012-01-11T06:24:00.000-08:00

Floating lamp by Angela Jansen. What makes this lamp floating is the integrated levitation technology. It consist out of electromagnetic components and a sophisticated control system. (+ movie) (+ source)

Artengo rollnet 600 | Spring clamp

2012-01-07T08:45:00.000-08:00

Free table tennis net. This net is 2 meters long, can be clipped onto tables up to 5cm thick and is easy to carry.
(+ movie) (+ source)

Revolver | Hook

2012-01-04T01:18:00.000-08:00

Revolver’ is a display and storage system based on a simple reversible shelf design. The cantilever system works by simply hooking one shelf above the other into the wooden frame, resulting in a display that can be changed by the turn of a hand. (+ source)

Emergency shelter | Fit

2011-12-21T05:44:00.000-08:00

Emergency shelter system made of two sizes of cardboard tubing, plywood, ropes and white curtains. The modular system allows for fast and easy assembly and disassembly. (+ source)

Kee clamp | Thread clamp

2011-12-21T05:19:00.000-08:00

The underlying principle is simple but highly effective: use slip-on components to create versatile and rigid tubular structures. The Kee Klamp principle has been developed and refined for more than 75 years resulting in an extensive range of components suited for any need. (+ source)

Usefull zipper shoes | Zipper

2011-12-17T04:35:00.000-08:00

Zippers could be applied in shoes to create an extra function. Two shoes in one, better storage, ... (+ read more)

The Nat-2 shoes look like a regular pair of 'Converse style' canvas shoes. A zipper around the sole uncovers a pair of summer flip flops hidden beneath. (+ source)

(+ movie)

‘Radler Trail Camp’ by Timberland is a lightweight and water-repellent shoe quite suitable for outdoor activities. It is especially excellent for the foldable design, featuring a zipper along its sole so that the shoe can fold along its center when not in use. (+ source)

The Alouette Chandelier | Elastic band

2011-12-15T03:04:00.000-08:00

The Alouette Chandelier by Dystil. The different sheets fit together by the interlocking shape. Two rubber bands hold all the parts together. (+ source)

Fencing reflector | Hook

2011-12-13T07:34:00.000-08:00

A PVC reflected plank used to increase the visibility of mesh fencing. The reflected plank is attached to the fencing using a hook.(+ source)

Desk | Dovetails

2011-12-12T00:40:00.001-08:00

The desk is completely made with a CNC Router. With the joints as the decorative element in it. The desk is designed to show the joinery and give it prominent place, it is an example of how this idea of joinery can be implemented in many different ways. (+ source)

Obeikan package | Interlocking shape

2011-12-04T08:29:00.001-08:00

Obeikan brings to the market its new and innovative wooden packaging system, staple free, based on its patented assembly system. The Obeikan packaging system includes the application of printed paper stuck to MDF, which is cut by laser, and an assembly system that allows the efficient transport of the unassembled pack parts to their point of use. (+ source)

Clip | Elastic clip

2011-12-01T14:30:00.000-08:00

Clip by Paul Sandip. The product is a single piece injection molded component in recycled plastic with reduced number of components. Its primary innovation is the possibility of being hanged by both of its extremities. (+source)

Harry | Flexible hooks

2011-12-01T14:18:00.000-08:00

Harry by Reinhard Schmoelzer. His 100’s of flexible and sturdy wire “hooks” will allow you to form them to fit your needs, providing the foundation to creatively organize and hold your stuff. Just mount Harry securely to the wall or other flat surface using the provided suction cups or screws. (+ source)

Twisttable | Folding

2011-11-27T06:46:00.001-08:00

30 seconds, that is all it takes to set up this multifunctional, 100 % recycled cardboard table. A laminate coating makes this table waterproof and stainfree. The Twisttable is easy to set up and takes little storage room. (+ movie) (+ source)

Symmetrical buckle | Snap

2011-11-23T15:32:00.001-08:00

This clasp mates two identically-angled connectors. This makes the connectors less expensive to manufacture and easier to release; it gives the user more flexibility because there’s no need to match male and female halves. (+ source)

Convert belt | Hook and pins

2011-11-23T15:30:00.001-08:00

Lacing allows the belt ends to be connected and disconnected as opposed to an “endless” belt which is spliced. (+ source)

Grip Tape | Friction

2011-11-23T15:26:00.000-08:00

Grip Tape is a specially treated fabric covered with an embossed silicone rubber coating. The gripping surface is highly resistant to “sticky” substances, yet provides a “non-slip” effect on smooth surfaces. (+ source) (+ movie)

Twist chair | Screw thread

2011-11-23T12:27:00.000-08:00

The 'Twist' uses a corkscrew base that you plug into the ground and spin until it's solidly placed. (+ source)

Shrine rack | Shape + gravity

2011-11-23T12:21:00.001-08:00

Each shoe is held in place between an upper and lower arm. Bent taps gently rest against the toe while supporting the weight of the shoe. (+ source)

Printable velcro | Hook and loop

2011-11-21T07:05:00.000-08:00

Integrate a hook and loop connection in your freeform 3D print design? "It is pretty nice to hang things, probably this small piece will resist much more than a kilogram of weight (hanging weight) and it is very easy to remove." (+ source) (+movie)

Cover clip | Clamp

2011-11-20T10:20:00.000-08:00

Reusable clip to attach to fabric with an eyelet for securing. No tools required. (+ source) (+ source 2)

Cavity wall system | Thread clamp

2011-11-20T10:01:00.000-08:00

The accessory sockets is fixed in the drill hole using a screwdriver and the fastening screw. The small holding plates on the rear side of the sockets provide the necessary hold. The same principle is also used in recessed lighting. (+ source)

Zipwall side clamps | Spring clamp + Snap

2011-11-18T13:11:00.000-08:00

With the ZipWall® Side Clamp and Foam Rail, you can create a tight seal without tape. The Side Clamp™ wall mount snaps onto the Foam Rail™ cross bar and then pushes the plastic against the wall to create a dust tight edge. (+ source) (+ movie)

Metal formwork | Wedge clamp

2011-11-18T13:04:00.000-08:00

Vesto metal frame formwork for casting walls, pillars, support walls and earth retaining walls as well as vertical-type castings. Two types of wedge clamp guarantee the joint between the panels. The aligning clamp fastens and the UNA patented aligner can be adjusted. When the clamps are positioned at any point on the perimeter frame the clamps connect the panels both horizontally and vertically. (+ source)

Wall clamp shelf | Thread clamp

2011-11-18T12:55:00.000-08:00

Wall clamp by Brendan Ravenhill. A C-clamp designed to screw into the wall. The A-symmetrical jaws and tightening screw allow you to turn any flat material into a shelf. (+ source)

Wand wall clamp | Elastic clamp

2011-11-18T12:50:00.000-08:00

The 'Wand wall clamp' is held in place with two screws. The rubber material grips the wand so that the wand stays in place without being loose in your closet. (+ source)

Bott Perfo | Hook

2011-11-18T12:26:00.000-08:00

Bott Perfo is a tool storage solution. The complete range of Perfo accessories could be attached to a perforated sheet steel panels using hooks. The 'quick fix perfolock' fixes the accessories. (+ source)

Grooved pipe joint | Thread clamp

2011-11-18T12:23:00.000-08:00

A grooved pipe joint is comprised of four elements: the grooved pipe, the gasket, the coupling housings, and the nuts and bolts. The groove is made by cold forming or machining a groove into the end of a pipe. A gasket encompassed by the coupling housing is wrapped around the two pipe ends, and the key sections of the coupling housing engage the grooves. The bolts and nuts are tightened with a socket wrench or impact wrench. (+ source)

Extrusion welding | Heat sealing

2011-11-17T07:08:00.000-08:00

Extrusion welding is a welding procedure predominantly realized manually by using continuous fed-in additive. Components with a wall thickness up to 30 mm can be joint in one work step. The procedure is mainly used in apparatus engineering, container, and piping manufacturing, civil engineering and canalization and, building industry and groundwater protection in landfills. (+ source)

Corker | Wedge

2011-11-07T11:41:00.000-08:00

Corker by Akinori Tagashira. A stool made from wood and cork. The cork seat holds the stool together based on the wedge principle. (+ source)

Mudguards | Folding + press stud

2011-11-07T11:29:00.000-08:00

Bicycle mudguards by Full Windsor. 'Quickfix' clicks on the bike frame using press studs. Folding flat when not in use for easy transport. while similarly simple to mount. (+ source)

Shelf | Shape + fit

2011-11-04T12:25:00.000-07:00

Shelf composed from a thermoformed polystyrene base module which makes the whole a light and stable piece. The bars can be placed responding to different needs, the fabric passes through them creating the supporting element. The packing is flat thanks to the mobility of the bars. (+ source)

Rubber gripper | Elastic clamp

2011-11-03T02:22:00.000-07:00

Rubber grippers are used to attach fabrics and cloths. They are applied in different products.(+ read more)

You can easily attach the Swiffer cloths to the sweeper with the soft touch grippers. (+ source)

The towel is attached to a rubber grip. (+ source)

Self made clamp | Elastic clamp

2011-10-26T13:29:00.000-07:00

Clamp made from plastic drain pipes. The pipe is cut across. The handles make them easy to use one handed. (+ source)

Furniture | Pin

2011-10-25T11:25:00.000-07:00

Furniture by Keiji Ashizawa. "These are a series of simple furniture that use a hardware made up of welded steel pipes and wood rods passing through them. The welded pipes are extremely flexible in terms of variations in design. The wood and hardware are joined and fixed with dowels driven into mortises. In addition to being extremely intuitive and easy to assemble, transportation is also easy because they can be packed flat when dismantled." (+ source)

Construction | Pin

2011-10-25T03:13:00.000-07:00

Wooden stick is placed on metal pin. (+ source)

Timber table | Dovetail, mortise and tenon

2011-10-17T04:26:00.001-07:00

Constructed from just 10 pieces of FSC certified maple or oak, and using no screws, nails or glue. Disassembly just takes minutes and Timber packs down to a highly transportable package. (+ source) (+ movie)

Card hanger | Spring clamp

2011-10-11T02:52:00.000-07:00

Clip for attaching cards to a ceiling system. (+ source)

Tin mint box | Click clack

2011-10-09T13:43:00.000-07:00

Pushing the cap opens the mint box. By pushing on the cap, it elastic deforms. (+ source)

Glimpt stool | Fit

2011-10-04T02:43:00.000-07:00

Turned seat with milled grooves underneath for easy mounting of the metal legs. No need for screws and fittings. (+ source)

Plus unit | shape

2011-10-04T02:33:00.000-07:00

The single drawer-units in ABS or translucent PMMA are connected with aluminium extrusions on which specialy developed sliding mechanisms made from teflon are mounted. Visually the aluminium flower-joint symbolizes the connection of two or four drawers and explains the modularity. (+ source)

Keel seat | Wedge

2011-10-04T02:28:00.000-07:00

Keel seat by Oscar Narud. The two boards wedge tight towards each other restricted by the cast iron frame.

(+ source)

Hook sponge | Snap

2011-10-04T02:26:00.000-07:00

'Hook sponge' design allows user to hook it around the faucet, not just to create a tidier counter, it also keeps the sponge dry. (+ source)

Clamcleat | Wedge

2011-10-01T02:41:00.000-07:00

A deceptively simple ridged 'V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. (+ source)

M3 chair | Pin

2011-09-29T08:49:00.001-07:00

The M3 Chair by Thomas Feichtner. It measures is made with oak, diagonal struts connecting the outer corners to its square seat. (+ movie) (+ source)

Intersection | Interlocking shape

2011-09-19T08:25:00.000-07:00

The concept comes from the idea of the connection between the two elements which make up a table: the table top on the one hand, and the table leg on the other hand. The particular drawing of the table allows to fix these 2 elements by using a crossbar, which also serves as a carrying handle. This makes the small table easy to move in the house. (+ source)

Split table | Elastic deform

2011-09-17T04:31:00.000-07:00

Split Table is assembled using the tension of the plywood, without glue, srews or bolts. (+ source)

Minifix | Cam & bolt

2011-09-06T02:08:00.000-07:00

Connectors (also called cam and bolt connectors) are ideal for high speed production. Connectors are reliable fasteners which increase project throughput, standardize production, enable “knock down”, decrease end customer assembly time and ease on-site installation. (+ source)

Clamped stool | Thread clamp

2011-08-30T05:15:00.000-07:00

Clamped stool by Daniel Glazman. The legs are held against the seat underside by a single clamp integrated in the third leg.
(+ source)

Barkwadraat | Magnets

2011-08-23T06:53:00.000-07:00

Barkwadraat by greentunadesign and joenes. The base of the table snaps together using strong magnets.
(+ source) (+ movie)

Kicks | Self adhesive

2011-08-22T06:37:00.001-07:00

"Kicks use a light 3M adhesive that will not mark your iPad. Easy to apply and strong enough to remain securely in place for everyday use. Reposition and replace at-will without leaving any marks." (+ source)

Hook | Shape

2011-08-18T04:31:00.000-07:00

Single hook by Pedersen and Lennard. The metal bracket holds a wooden pin. (+ source)

Stitching concrete | Stitch

2011-08-16T02:33:00.000-07:00

Stitching concrete is a project by using the new material Concrete Canvas.It combines the softness of cloth with the stability of concrete. Once brought in the final shape, you just have to water the material and within 24h it will alomst harden out completely. Approching trough patterns, origami and stitchings a unique series of stools got born. (+ source)

Quick-locking hose clamp |

2011-08-12T02:34:00.000-07:00

Quick-release latches are available in several styles and used to join tubes. (+ source)

Ropey chair | Resin

2011-07-29T21:55:00.000-07:00

Ropey chair is made from 80 metres of sisal rope soaked in polyurethane resin and cured into 20 unique profiles, which create a smoothly contoured surface. (+ source)

Campaign chair | Pin

2011-07-29T21:26:00.000-07:00

Campaign chair by Max Lamb. The chair is is crafted from hand turned ash wood and dunhill tradition leather. The wood is joined together by its conic shape. The leather is attached to the wood by creating loops and fixed with a pin. (+ source)

Recessiondesign.org | Website

2011-07-29T21:04:00.000-07:00

Recession Design is a collection of objects created using everyday DIY products that are processed and assembled using common utensils and accessories. Instructions are free to download. (+ source)

Poles apart | Rubber rings

2011-07-15T01:00:00.000-07:00

Poles Apart by Adrian Bergman. A modular retail display system that’s only held together by rubber rings. Rubber rings on both sides of angled holes in the table top hold the legs in place. (+ source)

Boomerang system | Rod

2011-07-13T08:12:00.000-07:00

By combining and stacking the same element, it is possible to assemble a great number of functional objects such as various furniture; armchair, chair, chaise, table, bench, partition, hanger, shelves and the like. The elements are joined using rods. (+ source)

Domingos Tótora | Molded cardboard pulp

2011-07-12T05:36:00.000-07:00

Domingos Tótora. 'Recycled cardboard is broken up into small pieces and turned into a pulp that serves as the base material for furniture, objects and sculptural pieces that are molded by hand, dried in the sun and finished to perfection.' (+ source)

Clip trash can | Clothes pin

2011-07-12T05:28:00.000-07:00

Clip trash can by Hommin. A plastic bag could be attached using four clothes-pins. The clothes-pins are integrated in the total shape. (+ source)

Micro suction tape | Vacuum force

2011-07-12T05:08:00.000-07:00

"It is made of an acrylic foam sheet pocked with suction cups so small they're invisible to the naked eye. Once stuck on a surface, you can easily peel it from the edge because the sucking power of each cup is weak. But the total combined sucking power is extremely strong. So you really feel the adhesion when you try to pull it off a surface all at once vertically or horizontally." (+ source)

Birdbox | Wedges

2011-07-07T05:27:00.000-07:00

Plywood birdbox by Jack Smith. The two flat pieces are bend and joined together using pins. (+ source)

Folding stool | Hinges

2011-07-07T05:15:00.000-07:00

Folding stool by Jack Smith. The stool’s three hinged legs fit perfectly into a y-shaped hole in the seat, locking them into place. (+ source)

Traliccio | Shape + gravity

2011-07-04T13:14:00.000-07:00

Traliccio is a library wall in wood and metal. The shelves can be easily moved either vertically, by utilizing the teeth found on the back of the two supporting columns of wood, or horizontally so as to leave the user maximum freedom of composition. (+ source) (+ movie)

Peha haft | Self adhesive

2011-06-30T12:23:00.000-07:00

Cohesive, elastic conforming bandages with a double adhesive effect due to its crêpe texture and micro-structured latex coating. Extensibility about 85 % low consumption of material due to its strong self-adhesive effect. The bandage adheres to itself, but not to skin, hair or clothing. (+ source)

Redo me furniture | Bolt

2011-06-30T07:01:00.000-07:00

The system consists of three different pieces that can be mounted in many different configurations. The parts are assembled without any glue, using a extensible rod system that allows any number of mounting and dismounting cycles.
(+ movie) (+ source)

Constructiv click | Magnets

2011-06-27T02:12:00.000-07:00

The connectors are made of natural-anodized aluminium tubing into which two magnets have been pressed. The modular elements come together with a soft click, creating the modular architecture system. The pp sheets are attached to the connectors using an elastic band. (+ source)

Explosion welding | Welding

2011-06-16T08:54:00.000-07:00

The explosion welding cladding process uses the energy of an explosive detonation to create a metallurgical weld between metals. Explosion welding can produce a bond between two metals that cannot necessarily be welded by conventional means. Due to the nature of this process, producible geometries are very limited. (+ source) (+ movie)

Skalor shelving | Lap joint

2011-06-09T11:44:00.000-07:00

A plug-in shelving system that can be assembled and modified quickly, without tools. Innovative lap joints create stable, aesthetically-pleasing configurations of horizontal and vertical plywood panels. (+ source)

Plydea | Interlocking shape + tension

2011-06-09T11:27:00.000-07:00

The Plydea products are made with birch plywood. They are designed with the aim of using the thinnest material possible with the least waste possible. This is achieved by an inventive use of selective tensioning in the products. The furniture uses no fasteners and no tools are required for assembly. The parts are joined using integrated joints. (+ source)

Crutch | Spring snap

2011-06-06T01:10:00.000-07:00

An aluminium crutch. By pushing on the pin the height of the crutch could be easily changed.

Moki stool | Shape

2011-05-29T09:58:00.000-07:00

Moki stool by Cosmia Geyer. The legs are made of oak wood and are connected to each other via triangular iron thread construction within. The bottom of the seat includes holes for the stool legs to slide and interlock into place. (+ source)

Endless lighting system | Hook and eye

2011-05-26T02:46:00.000-07:00

Endless is a modular lighting system. Half-cylinder units are joined together, back-to-back or end-to-end, to form endless configurations around a room or space. The system hangs to the ceiling using a hook and eye connections. (+ source)

Didit furniture | Snap

2011-05-24T06:55:00.000-07:00

Didit furniture could be assembled without tools. The 'click' connections are integrated in the wooden panels. Assembly movie on website: (+ source)

Stand up | Twist joint

2011-05-19T23:47:00.000-07:00

'Stand up' is a laptop stand. The stand, made of wood, could be assembled using a clever twist joint. (+ movie) (+ source)

For one or two | Felt hinges

2011-05-17T03:55:00.000-07:00

A folding table made of wood and felt. The table is easily manipulated and transformed from one position to another due to the fabric applied in between layers of wooden surfaces. Stripes and surfaces of fabric function both as joints and decorative elements, thus enhancing the tactile sensation of the table through play of soft and hard. (+ source)

Twin one | Snap

2011-05-15T05:37:00.000-07:00

Twin one from Lekué. By fitting the pieces of cutlery together, they become an easy-to-use set of chopsticks, that bring together the Oriental and Occidental traditions in a funny way. (+ source)

Bag sealer | Spring clamp

2011-05-13T12:07:00.000-07:00

The bag sealer seal bags via simple actions of pressing and releasing the sealer. A magnet on the back could hold the bag sealer to a fridge. (+ source)

Devil's knot | Interlocking shape

2011-05-13T11:59:00.000-07:00

Three different cut outs providing structural stability without any tools.(+ read more)

"This principle is used by ding300 to create a table. By means of the simple enigmatic principle of the slightly transformed devil's knot."(+ source)

Cutlery by ding3000. The cutlery consisting of fork, knife and spoon, assembles to form a 3-D puzzle: Each of the three utensils has an opening in the middle that allows them to be joined, forming a small yet stable free-standing sculpture that challenges the user to test his or her mental dexterity before being able to eat. (+ source) (+ source 2)

Bottle cap | Asymetric shape

2011-05-10T10:58:00.000-07:00

An asymmetric tear-drop shaped bottle cap by Shao Nung. The cap allows to easily open the bottle. (+ source)

Chicken fun | Elastic band

2011-05-10T10:51:00.000-07:00

Chicken fun is a feeding ball for chickens. The two plastic parts are joined using a rubber band tied to the parts. The ball could easily opened to refill. (+ source)

Storage box | Snap + shape

2011-05-10T10:37:00.000-07:00

Plastic storage box. The cover is attached to the body with a snap connection with between a rubber part. The rubber part push the cover open. (+ more)

Mouri furniture | Shape

2011-05-09T03:00:00.000-07:00

The joins are the 'Mouri' series' distinguishing feature. They are reminiscent of Gordian knots. With their formal suggestion of branches and roots, they underscore the wood's organic character, while translating this into highly considered, designed forms. (+ source)

Apple smart cover | Magnets

2011-05-02T07:58:00.000-07:00

"When the Smart Cover and iPad get together, you can’t help but notice an instant connection. That’s because we designed iPad to work with the Smart Cover — and the other way around. For starters, iPad has magnets built right into its frame — magnets that align perfectly with the Smart Cover hinge for an effortless fit." (+ source) (+ movie)

Electrostatic attraction | Force field

2011-04-28T02:54:00.000-07:00

Attraction due electrostatic force. This is used for example in the in-mold labeling process. A label is placed in the open mold and held in the desired position by electrostatic attraction.
(+ source)

Stack furniture | Hook and loop fastener

2011-04-16T13:13:00.000-07:00

STACK is a modular furniture system that is reduced to just one element. The elements are stacked and stuck together with industrial velcro. (+ source)